Linux network configuration overview
Interface naming, network managers (systemd-networkd, NetworkManager, netplan, netctl), statistics and DHCP checks on Linux.
This article gives an overview of network interface names and of the main network managers on Linux, with the commands to check the state of a network card, its link statistics and DHCP traffic.
Interface names
Recent systemd versions use predictable interface names built from the hardware location. For example, enp0s10 is read as:
| Part | Meaning |
|---|---|
en |
Ethernet (wl would mean wireless) |
p0 |
PCI bus number (0) |
s10 |
Slot number (10) |
To list the interfaces and the Ethernet controllers:
ls /sys/class/net
lspci | grep Ethernet
To check the link state, speed and duplex of an interface:
sudo ethtool <interface>
Network managers
Identify the manager in use before changing a configuration. Several managers on the same machine can fight over the same interface.
| Manager | Service | Configuration | Tools |
|---|---|---|---|
| systemd-networkd (common on servers) | systemd-networkd.service |
/etc/systemd/network/ |
networkctl status |
| NetworkManager (common on desktops) | NetworkManager.service |
/etc/NetworkManager/system-connections/ |
nmcli, nmtui |
| netplan (Ubuntu) | netplan generates the configuration for the back end | /etc/netplan/*.yaml |
sudo netplan apply, sudo netplan --debug apply |
| netctl (Arch Linux) | netctl.service |
/etc/netctl/ |
netctl |
Notes on each manager:
- systemd-networkd: DHCP is built in. DNS resolution is handled by systemd-resolved, configured in
/etc/systemd/resolved.confor/etc/systemd/resolved.conf.d/. - NetworkManager: DHCP is built in, or uses
dhclient. DNS servers can be set in/etc/NetworkManager/conf.d/. On Red Hat-based systems,/etc/sysconfig/network-scripts/is the older location and is deprecated. - netplan: edit the YAML file (for example
/etc/netplan/01-netcfg.yaml), then apply it. Use the--debugoption to see what is generated. - dhcpcd: a standalone DHCP client, managed with
systemctl status dhcpcd.service.
Firewall
On AlmaLinux and other Red Hat-based systems, firewalld manages the firewall. See How to allow a port through the firewall on AlmaLinux.
Interface and traffic statistics
| Command | Shows |
|---|---|
ip -s link |
Packet and error counters for each interface |
ss -s |
Summary of socket usage |
netstat -i |
Interface counters (net-tools package) |
netstat -s |
Protocol statistics (net-tools package) |
nstat |
Kernel network counters, with changes since the last call |
sar -n DEV 1 3 |
Network throughput per interface, every second, three samples (sysstat package) |
More commands are listed in Linux networking commands on TecMint.
DHCP server and client
On an ISC DHCP server, the leases file is /var/lib/dhcpd/dhcpd.leases:
tail -f /var/lib/dhcpd/dhcpd.leases
To capture DHCP traffic (ports 67 and 68) on an interface:
sudo tcpdump -i <interface> port 67 or port 68 -e -n -vv
Notes
- Run
networkctl(systemd-networkd) ornmcli device status(NetworkManager) to see which manager handles each interface. - Changes made in one manager are not seen by another. Keep one manager per interface.