Linux hardware inventory: useful commands
Linux commands to inventory hardware: CPU, memory, disks, PCI, USB, network and BIOS/UEFI.
The table below groups common commands for inventorying the hardware of a Linux system. Where several commands are listed, they give equivalent or similar information.
| Information | Command |
|---|---|
| Overview of all hardware | inxi -Fxz or hwinfo --short or lshw -short |
| Full CPU information | lscpu or lshw -C cpu |
| CPU features (PAE, SSE2, etc.) | lshw -C cpu | grep -i capabilities |
| 32-bit or 64-bit architecture | lshw -C cpu | grep -i width |
| Current memory size and configuration | dmidecode -t memory | grep -i size or lshw -short -C memory |
| Maximum memory supported by the hardware | dmidecode -t memory | grep -i max |
| Free memory slots | lshw -short -C memory | grep -i empty (no output means no free slot) |
| Amount of video memory | lspci | grep -i vga, then run again with the device number, for example lspci -v -s 00:02.0; the VRAM is the prefetchable value |
| Current memory usage | free -m or top |
| List of disks | lshw -short -C disk |
| Details of a disk | hdparm -i /dev/sda (replace sda if necessary) |
| Disks and partitions | lsblk (simple) or fdisk -l (detailed) |
| Partition UUIDs | blkid |
| Mounted filesystems, mount points, space used and available (in MB) | df -m |
| USB devices | lsusb |
| PCI devices | lspci |
| Network card details | lshw -C network |
| Network interfaces | ifconfig -a or ip link show or netstat -i |
| Routing tables | ip route | column -t or netstat -r |
| BIOS/UEFI information | dmidecode -t bios |
| Kernel version, hostname, etc. | uname -a |