LLI Wiki — My Digital Knowledge Base

RJ45 Ethernet cables: types, shielding and Cat6 vs Cat6a

Straight vs crossover cables, U/F/S shielding codes and a Cat6 vs Cat6a comparison.

A quick reference on RJ45 Ethernet cable types: straight versus crossover, shielding codes and a Cat6 versus Cat6a comparison.

Straight and crossover cables

There are two kinds of RJ45 cable: straight and crossover. A crossover cable is only used to connect two PCs directly; a straight cable connects a PC to a hub or switch.

A 10BASE-T or 100BASE-TX cable (T = twisted pair) generally contains 8 insulated wires twisted in pairs, inside a sheath (often grey). Each pair has a coloured wire twisted with a lighter or white-striped companion. The pair order in the connector depends on the wiring standard; the usual reference for a standard Ethernet cable is ISO 11801 / EIA/TIA 568A.

Shielding codes

Code Meaning
U no shielding
F foil shielding (metal foil)
S braided shielding (metal wire braid)

Common cable types:

Type Description
UTP unshielded
FTP foil screened
SFTP braid and foil shielded
SSTP (PiMF) each pair shielded individually

Cat6 versus Cat6a

Parameter Cat6 Cat6a
Speed 10 Gbps over 33-55 m (110-165 ft) of cable 10 Gbps over 100 m (330 ft) of cable
Frequency Up to 250 MHz Up to 500 MHz
Maximum cable length 100 m for slower speeds (up to 1,000 Mbps) and higher speeds over short distances; for Gigabit Ethernet, 55 m max, 33 m in high crosstalk conditions 100 m across all systems and conditions
Cost Averages $0.40-$0.60 per foot, about 20% above Cat5e Averages $0.55-$0.85 per foot, about 20-35% above Cat6
Conductor gauge 22-24 AWG 16-20 AWG

Notes

The figures in the comparison table come from a third-party summary and vary by manufacturer; check the cable datasheet.

Mastodon LLIMastodon SocialFosstodon